3 Change settings
This section helps you change the settings of this player.
1
2DISC MENU
3 
Note
You cannot change a menu option that is grayed out. To return to the previous menu, press 
.To exit the menu, press 
.
Picture
1Press 
.
2Select [Setup] > [Video] to access the video setup options.
[TV display]: Select a picture display
[HDMI video]: Select an HDMI video resolution.
[HDMI Deep Color]: Display colors with more shades and hues when the video content is recorded in Deep Color and the TV supports this feature. [Picture settings]
color setting.
Note
If you change a setting, make sure that the TV supports | English |
| |
the new setting. |
|
Sound
1 Press 
.
2Select [Setup] > [Audio] to access the audio setup options.
[Night mode]: Select quiet or full dynamic sound. Night mode decreases the volume of loud sound and increases the volume of soft sound (such as speech).
[HDMI Audio]: Set an HDMI audio format when this player is connected through HDMI.
[Digital Audio]: Select an audio format for the sound output when this player is connected through a digital connector (coaxial).
[PCM Downsampling]: Set the sampling rate for PCM audio output when this player is connected through a digital connector (coaxial).
Note
Night mode is only available for Dolby encoded DVD and
Network (installation, status...)
1 Press 
.
2Select [Setup] > [Network] to access the network setup options.
[Network installation]: Start a wired or wireless installation to make the network work.
EN 13
