Philips BDP5005/F7 manual 32 EN

LIST OF SETTINGS

Advanced Setup

Category		Menus/Options
	Night Mode	On
Audio
		Off
	Down Sampling
		On
		Off

Virtual Surround	On
	Off
Blu-ray Disc Audio	Mix Audio Output
	Primary Audio Only

HDMI Audio	HDMI Normal
• This feature is	PCM
available only when	Off
the display device is
connected by an
HDMI cable.
• Refer to page 37 for
more information.
Digital Out	Bitstream

•When HDMI cable is PCM connected, make

sure “HDMI Audio” setting is set to “Off” to change the “Digital Out” setting.

•Refer to page 38 for more information.

Description

Compresses the range between soft and loud sounds.

“On”:

Activates the Night Mode.

“Off”:

Deactivates the Night Mode.

Sets the sampling rate for outputting the PCM audio from the digital output (coaxial/optical).

“On”:

Over 96 kHz PCM audio will be down sampled at 48 kHz.

“Off”:

For BD or DVD recorded in LPCM without copyright protection,

2-channel audio signals up to 96 kHz are output as LPCM signals.

Select “On” to enjoy the stereophonic virtual space through your existing 2 channel stereo system during playback of BD-video or DVD-video.

“Mix Audio Output”:

The audio for the secondary video and the interactive application will be output together with the audio for the primary video.

“Primary Audio Only”:

Only the audio for the primary video will be output.

When playing back a BD-video which only contains the primary audio, the audio output will be the same case as the “Primary Audio Only” even if the “Blu-ray Disc Audio” is set to “Mix Audio Output”.

Sets the audio format for the sound output from the HDMI OUT.

Sets the audio format for the sound output from the DIGITAL OUT (OPTICAL/COAXIAL).

32 EN