SETUPS
You can set connection speed as your preference. (The default setting is “Auto”.)
1)Follow steps 1) to 4) in “Connection Test” on page 40.
2)Use [K / L] to highlight “Enable(Custom)”, then press [OK].
3)Use [K / L] to highlight “Connection Speed”, then press [OK].
4)Use [K / L] to highlight the desired setting, then press [OK].
Set the appropriate connection speed automatically, in accordance with your network environment.
Set the connection speed to “10BASE Half”.
Set the connection speed to “10BASE Full”.
Set the connection speed to “100BASE Half”.
Set the connection speed to “100BASE Full”.
5)Press [BACK U] to go back to the previous screen, or press [HOME ] to go back to the home menu.
•Choose a connection speed in accordance with your network environment.
•The network connection may be disabled depending on the device, when the settings are changed.
You can limit the Internet access from the
1)Follow steps 1) to 4) in “Connection Test” on page 40.
2)Use [K / L] to highlight “Enable(Custom)”, then press [OK].
3)Use [K / L] to highlight
4)Use [K / L] to highlight the desired setting, then press [OK].
Internet access is permitted from all
Internet access is permitted only for
Internet access is prohibited from all
5)Press [BACK U] to go back to the previous screen, or press [HOME ] to go back to the home menu.
You can check the status of network settings.
1)Follow steps 1) to 4) in “Connection Test” on page 40.
2)Use [K / L] to highlight “Enable(Custom)”, then press [OK].
3)Use [K / L] to highlight “Network Status”, then press [OK].
• Network setting list will be displayed.
4)Press [BACK U] to go back to the previous screen, or press [HOME ] to go back to the home menu.
Setup Function PlaybackSetup Basic Connections Introduction
HOME A“Settings” A“AdvancedSetup” A“Others” AConnection”“Network A“Disable”
Deactivate all the network connection and settings.
1)Follow steps 1) to 4) in “Connection Test” on page 40.
2)Use [K / L] to highlight “Disable”, then press [OK].
3)Use [K / L] to highlight “Yes”, then press [OK].
4)Press [BACK U] to go back to the previous screen, or press [HOME ] to go back to the home menu.
•The network connection can be reactivated by setting the network connection to “Enable(Easy)” or “Enable(Custom)”.
Others
EN 43