Tip
•The wired network ensures the best performance for data transmission between the devices.
Set up a wireless network
Note
•Ensure that this player and the router and the PC are all switched on.
Tip
•The wireless performance can vary due to bandwidth connection, network traffic and some environmental effects, such as surrounded by metal panel or heavy concrete, radio interference and coverage distance.
Install the network connection
For the first time you connect the network, install the network connection.
1Set up a wired or wireless network.
2Press to display the home menu.
3Select [Setup] and press OK.
4Select [Network], and press OK.
5Select [Network Installation], and press OK.
6Follow the
»After the network installation completes, you can access the services: browse NetTV, browse PC,
Tip
•You can check the status of the wired or wireless connection of this player (see “Adjust settings” > “Network Setup” > [View Network Settings] or [View Wireless Settings]).
Use Philips EasyLink
This player supports Philips EasyLink which uses the HDMI CEC (Consumer Electronics Control) protocol. You can use one single remote control to control
Note
•To enable the EasyLink feature, you must turn on the HDMI CEC operations on the TV and on other devices connected to TV. Refer to the TVs/devices manual for details.
16EN