Philips BDP9600 manual Sound, Play, Network, No sound on Hdmi connection

•Check if the HDMI cable is faulty. Replace a new HDMI cable.

•On the remote control, press and then

press “731” (numeric buttons) to recover picture display.

No high-definition video signal on the TV.

•Make sure that the disc contains high- definition video.

•Make sure that the TV supports high- definition video.

Blu-ray 3D effect is not seen on the TV.

•3D option on this player is turned off. Enable

3D output (see “Adjust settings” > “Video setup” > [Blu-ray 3D video]).

•Ensure that the disc title being played is Blu-ray 3D compliant.

•Ensure that the TV is 3D and HDMI compliant, and the TV is set to 3D mode (refer to the TV’s user manual).

•Ensure that the 3D glasses are activated (refer to the TV’s user manual).

Sound

No audio output from the TV.

•Ensure that the audio cables are connected to the audio input of the TV.

•Assign the audio input of the TV to the corresponding video input. See the TV user manual for details.

No audio output from the loudspeakers of the audio device (home theater /amplifier/receiver).

•Ensure that the audio cables are connected to the audio input of the audio device.

•Turn on the audio device to its correct audio input source.

No 7.1 - channel audio from the loudspeaker of the audio system.

•Ensure that the disc contains 7.1 - channel audio.

•Ensure that the audio device supports 7.1 - channel audio.

•Ensure that the audio format is supported by the disc and the connected audio device (amplifier/receiver).

No sound on HDMI connection.

•You may not hear any sound from the HDMI output if the connected device is non-HDCP

compliant or only DVI-compatible.

No secondary audio output for Picture-in-Picture feature.

•When [Bitstream] under the [HDMI Audio] or [Digital Audio] menu is selected, interactive sound like secondary sound for Picture-in- Picture feature is muted. Deselect [Bitstream].

Play

Disc cannot be played.

•Ensure that the disc is correctly loaded.

•Ensure that this player supports the disc. See “Your Blu-ray disc player” > “Playable media”.

•Ensure that this player supports the region code of the DVD or BD.

•For DVD±RW or DVD±R, ensure that the disc is finalized.

•Clean the disc.

Data files (JPEG, MP3, WMA) cannot be played or read.

•Ensure that the data file was recorded in the UDF, ISO9660 or JOLIET format.

•Ensure that the disc does not contain more than 9,999 files for DVD, and 999 files for CD.

•Ensure that the JPEG file extension is.jpg, .JPG,

.jpeg or .JPEG.

•Ensure that the MP3/WMA file extension is .mp3 or .MP3, and .wma or .WMA for windows Media™ Audio.

DivX video files cannot be played.

•Ensure that the DivX video file is complete.

•Ensure that the file name extension is correct. The contents of the USB flash drive cannot be read.

•The USB flash drive format is not compatible with this player.

•Maximum size of memory supported is 160GB.

‘No entry’ or ‘x’ sign appears on theTV.

•The operation is not possible. EasyLink feature does not work.

•Ensure that this player is connected to the Philips brand EasyLink TV and the[EasyLink]in the menu is set to [On].

Unable to access BD-Live feature.

•Check the network connection or ensure that the network has been set up.

•Clear local storage, internal memory (if any) or USB.

•Ensure that the BD disc supports BD Live feature.

Network

Wireless network is not found or distorted.

•Microwave ovens, Dect phones or other wireless devices in your neighborhood might disturb the wireless network.

•Make sure that the firewalls in your network allow access to the wireless connection of this player.

30EN