Philips BDP9600 Play a disc, Play from a USB device, One-touch play, One-touch standby

One-touch play

1Press (standby) to turn on this player.

»The TV (if the TV supports one-touch play) automatically turns on and switches to the correct video-in channel.

»If a disc is loaded, disc play automatically starts.

One-touch standby

1Press and hold (standby) for more than 3 seconds.

»All the connected devices (if the device supports one-touch standby) automatically switch to standby.

Note

•Philips does not guarantee interoperability with all HDMI CEC devices.

5 Play

Play a disc

Caution

•Do not insert any objects other than discs into the disc slot.

1 Press on the front panel to open the disc compartment.

•You may also press and hold on the remote control to open/close the disc compartment.

2Insert a disc with its label facing up.

3Start disc play.

• To stop disc play, press .

Note

•Check disc/file formats supported (see “Your Blu-ray disc player” > “Playable media”).

•If the password entry menu is displayed, enter the password before you can play the locked or restricted disc (see “Adjust settings” > “Preference Setup” > [Parental Control] ).

•If you pause or stop a disc, the screen saver appears after 10 minutes of inactivity. To deactivate the screen saver, press any button.

•After you pause or stop a disc and no button is pressed within 30 minutes, this player automatically switches to standby.

Play from a USB device

Play or view media files on the following USB devices:

•flash drive

•memory card reader

•HDD (This player can detect only a portable hard disc drive with USB power peak current no more than 500mA.)

1Connect a USB device to the (USB) jack.

2Press , and select [browse USB], and press

OK.

» A contents menu is displayed.

14EN