Philips BDP9600 Network setup, EasyLink setup, Video, Network Installation, View Network Settings

[Digital Audio]

Select an audio format for the sound output from the DIGITAL OUT jack (coaxial/optical).

•[Auto] - Detect and select the best supported audio format automatically.

•[PCM] - The audio device does not support multi-channel format. Audio is downmixed to two-channel sound.

•[Bitstream] - Select the original audio to experience Dolby or DTS audio (BD-video special sound effect is disabled).

Note

•Ensure that the audio format is supported by the disc and the connected audio device (amplifier/receiver).

•When [Bitstream] is selected, interactive audio like button sound is muted.

[PCM Downsampling]

Set the sampling rate for PCM audio output from the DIGITAL OUT jack (coaxial/optical).

•[On] - PCM audio is down-sampled at 48kHz.

•[Off] - For BD or DVD recorded in LPCM without copyright protection, two-channel audio signals up to 96 kHz are output as LPCM signals with no conversion.

[Speaker Setup]

Optimize the surround output for the connected speaker system.

•[Speaker Setup] - Activate the test tone for the speakers and the subwoofer.

•[Speaker Distance] - Set the delay time for the speakers and the subwoofer if they are placed closer to the listening position, so that the sound output from all speakers reach the listening position at the same time.

•[Speaker Volume] - Set the volume level of the speakes and the subwoofer to get the ideal audio balance.

•[Speaker Size]

•Set the speaker size for the speakers and the subwoofer.

•Select [Large] size for speakers that can produce low frequency signal below 120 Hz.

•Select [Off] if there is no speaker connected.

•If the front speakers are set to [Small], the subwoofer setting is [On] by default.

•If the subwoofer is set to [Off], the front speakers settings are [Large] by default.

Tip

•The test tone is emitted from the speaker while adjusting the volume level.

•Allow 1ms setting for every 30cm distance between the speaker and the listening position.

Network setup

1Press .

2Select [Setup], and press OK.

3Select [Network], and press .

Video	Network Installation
	View Network Settings
Audio
	View Wireless Settings
Network	Net TV User Location
EasyLink	Clear Net TV Memory
Preference
Advanced

4Select an option, and press OK.

5Select a setting, and press OK.

•To return to the previous menu, press .

•To exit the menu, press .

[Network Installation]

Install the network connection. [View Network Settings]

Display the information for the current network status and the MAC address of this player. [View Wireless Settings]

Display the information for the current Wi-Fi status. [Net TV User Location]

Select the location of the Philips server which provides Net TV services.

If your country location is not in the list, select [International].

[Clear Net TV Memory]

Clear the cookies, history, data you input for Net TV which are stored in the cache area of the web browser.

EasyLink setup

1Press .

2Select [Setup], and press OK.

3Select [EasyLink], and press .

English

EN 23