Philips BDS4223V 43, 7.3 SLEEP TIMER Setting the Sleep Timer Using the OSD Menu

User Manual BDS4223V
43
7.3 SLEEP TIMER
Setting the Sleep Timer Using the OSD Menu
This monitor has a built-in sleep timer function. Once set, the monitor
will automatically shut-off without user intervention.
1 Press the MENU button on the monitor panel or remote control.
2 Use the SEL or SEL key to select the SETUP option from the
menu.
3 Press the ADJ key to confirm the selection.
=> Various options are available in the SETUP menu.
4 Use the SEL or SEL key to select the SLEEPTIMER option.
5 Press the ADJ key to confirm selection.
=> The SLEEP TIMER menu appears.
6 Use the ADJ or ADJ key to change the setting (OFF, 15MIN,
30MIN, 45MIN, 60MIN, 90MIN, 120MIN).
7 Press the SEL key to confirm setting and return to the previous
menu.
Note:
The monitor will function normally until the 1-minute mark. At the 1-
minute mark, the sleep timer will display a second by second countdown
clock to notify that you that the monitor is about to turn off.