User Manual BDS4223V
32Explanation of Various Picture Control Settings
Explanation of each available picture control settings are listed in the table below.
Note:
H-Position, H-Size, V-Position and V-Size adjustments are only available in RGB and Component input modes.
CONTRAST
Adjust Contrast to increase or decrease the level of white in the video picture. Increasing contrast will
make white areas of the video picture brighter. Contrast works in conjuction with Brightness.
BRIGHTNESS
Adjust brightness to enhance the level of dark areas in the video picture such as night scenes and shadow
scenes. Increasing brightness will make dark areas more visible.
COLOR
Use color to adjust the color saturation of the video picture. Increasing color will make the color more
intense. Reducing color setting will make the color less intense.
TINT
Use tint to adjust the color of fleshtones. Increase in the right direction will shift the picture with more
green in appearance. Decreasing setting in left direction will shift the picture with more red in appearance.
SHARPNESS
Use sharpness to adjust the amount of detail enhancement to the video picture. Increasing the setting will
enhance the edges of objects in the video picture. Decreasing the setting will reduce enhancement.
NOISE REDUCTION
To improve the quality of the picture in the case of poor reception.
COLOR TEMP
Select the color temperature for white balance. There are four settings to choose from: (1) COOL sets to
11000K; (2) NATURAL - sets to 9300K; (3) WARM - sets to 6500D.
FORMAT
Use to change various screen width modes. There are six modes to choose from: (1) 16:9, (2) 4:3, (3)
Panorama, (4) Zoom 1, (5) Zoom 2. See page 28 for more information
IMAGE SHIFT
Use the Image Shift function to prevent image stikking effects when a static image is displayed for a long
period of time. Increase the value to extend the time interval between each image shift operation.
V-SIZE
Use to change vertical size of the picture. Increase to enlarge the picture size in the vertical direction.
Decrease to reduce the picture size in the vertical direction.
V-POSITION
Use to change vertical position of the picture. Increase to shift the picture up. Decrease to shift the picture
down.
H-SIZE
Use to change horizontal size of the picture. Increase to enlarge the picture size in the horizontal direction.
Decrease to reduce the picture size in the horizontal direction.
H-POSITION
Use to change horizontal position of the picture. Increase to shift the picture to the right. Decrease to shift
the picture to the left.
CLOCK PHASE
Use clock phase to fine-tune the monitor to perfectly synchronize to the video signal source under RGB
mode.