Philips BT9290, BT9280 user manual Trimming without comb

10English

3 Start trimming where you want to define the edges of your beard and use the laser guide to guide you during trimming.

Tip: Hold the appliance so that the laser light shines exactly on the edge you want to trim and then place the trimming head on your skin.

4When you are finished, press the on/off button to switch off the appliance.

Tip:When the motor of the appliance is not operating, the laser guide switches off automatically within 3 minutes. In the 3 minutes before the automatic switch-off of the laser guide, you can use the laser guide to check if the contours of your beard are symmetrical or straight.

5Push down the top of the laser guide to lock it in ‘off’ position (‘click’).

Trimming without comb

If you trim without comb, your hair is cut off close to the skin.The trimming

head has a 32mm (1.25in) side and a 15mm (0.6in) side.The 15mm (0.6in) side of the trimming head allows more precise styling and contouring than the 32mm (1.25in) side.

1If one of the combs is still on the trimming head, pull it off.

Never pull at the flexible top of the comb. Always pull at the sides.

2Turn the trimming head until the side you want to use points to the

front of the appliance.