CD Player
Programming track num- bers
You may store up to 20 tracks in the desired sequence. If you like, store any track more than once.
1In the stop position, press PROG to activate programming.
➜Display: PROG and 00 flash. (See 5)
2Press ∞ or § to select your desired track number.
3Press PROG to store the desired track number.
➜Display: PROG and 00 flash for you to program the next track.
4Repeat steps 2 to 3 to select and store all desired tracks in this way.
➜If you attempt to store more than 20 tracks, no track can be selected and the display shows
5To play your program, press 2/;.
Helpful hints :
–When playback of your program comes to the stop position, your set returns to normal playback.To
Reviewing the program
In the stop position, press PROG repeatedly to see your stored tracks.
Erasing a program
You can erase the contents of the memory by:
–in the stop position, press PROG to enter program mode, and then press 9.
–selecting TUNER or OFF;
–opening the CD door;
Different play modes: REPEAT. and SHUFFLE (See 6, 7)
REPEAT
You can play the current track or the whole disc repeatedly, and combine REPEAT modes with PROG (PROGRAM).
REP – plays the current track continuously.
REP ALL – repeats the entire CD/program
1To select play mode, press REPEAT once or more.
➜ The display shows REP icon or REP ALL icon.
2Press 2; to start playback in the stop/pause position.
3To return to normal playback, press REPEAT repeatedly until the modes are no longer dis- played.
– You can also press 9 to cancel your play mode.
SHUFFLE
You can play all the tracks in random order.
1In the stop position, press SHUFFLE to switch on shuffle play.
➜ Display shows SHUF icon.
2To switch off shuffle play, press 9.
Helpful hints:
–During the shuffle play, when REP function is selected, the set plays the current shuffled track repeatedly, or when the REP ALL function is selected, it repeats the shuffle play of the entire CD.
