Automatic Channel Setup 11
Although the TV/VCR may automatically memorize the channels you receive when you turn it on for the first time, you may set up channels again by following the steps below.
1
Press the MENU button.
POWER | SLEEP |
> | PRIM. SETUP |
| PRESS B |
| VCR PROGRAM |
|
|
|
|
| |
| VCR SETUP |
|
|
| REMINDER |
|
|
| BRIGHTNESS |
|
|
| PICTURE |
|
|
2
1
REW
MENU
PLAY
F.FWD
STOP
STATUS/EXIT | CLEAR |
Press the PLAY/▲ button or the STOP/▼ button to select
1
4
2 3
5 6
CH.
PRIM. SETUP, then press the F.FWD/B button.
PRIMARY SETUP
>SELECT LANGUAGE AUTO PROGRAMMING CH MEMORY REVIEW
VOLUME BAR | [ON] |
SET CLOCK |
|
SELECT KL CHOOSE B
TO END PRESS EXIT
3
Press the PLAY/▲ button or the STOP/▼ button to select AUTO PROGRAMMING, then press the F.FWD/B but- ton. AUTO CH PROGRAMMING ... will appear on the screen. The TV/VCR distinguishes between TV channels and cable chan- nels automatically, and the TV/VCR will memorize its available
4
Wait for a few minutes. When setup is complete, CHANNELS ARE SET will appear on the screen. Then the programming of the lowest channel number placed in the TV/VCR’s memory will appear on the screen. Now, when you press the CH(annel) m/n button, you will scan only through channels you receive.
7 | 8 | 9 |
|
| 0 | ALT. CH | VOL. |
|
| ||
SPEED | MEMORY | PAUSE/STILL |
|
REC/OTR | TRACKING | MUTE |
4 Wait for the TV/VCR to set up channels.
Helpful Hints
•Line Input mode will always be stored in the TV/VCR’s memory as channel 00. You cannot delete it.