On-Screen Status Displays 25
A status display will appear when you press the STATUS/EXIT button or certain function buttons. The contents of the status display will vary. To choose the status display mode, follow the steps below.
If you select STATUS ON, then select COUNTER ONLY OFF:
●Whenever you press the STOP/p button or the PLAY/o but- ton, the status display will appear for five seconds. Portions of the status display also may appear when you press other func- tion buttons.
If you select STATUS ON, then select COUNTER ONLY ON:
●Whenever you press the PLAY/o button, the status display will appear for five seconds. After five seconds, only the counter will remain on the screen. Portions of the status display also may
appear when you press other function buttons.
If you select STATUS OFF:
●The status display will not appear when you press function but- tons. You must press the STATUS/EXIT button to see the sta- tus display.
1
Press the MENU button.
2
Press the PLAY/▲ button or the STOP/▼ button to select VCR SETUP, then press the F.FWD/B button.
3
Press the PLAY/▲ button or the STOP/▼ button to select
4
Press the PLAY/o button or the STOP/p button to select STATUS, then press the F.FWD/B button so that ON or
OFF appears beside STATUS.
> STATUS | [ON] |
COUNTER ONLY | [OFF] |
SELECT KL CHOOSE B
TO END PRESS EXIT
5
If you set STATUS to OFF, go to step 6. If you set STA- TUS to ON, press the PLAY/o button or the STOP/p button to select COUNTER ONLY, then press the F.FWD/B button so that ON or OFF appears beside it.
6
Press the STATUS/EXIT button.
|
|
|
|
|
| Current | |
Channel |
| Tape | |||||
| Time |
| Function | ||||
|
|
|
| ||||
|
|
|
|
|
|
|
|
|
| 12:00 AM |
| STOP | |||
|
| CH10 |
|
|
| ||
|
| SLP | M 1:23:45 | ||||
|
|
|
|
|
| ||
| Tape | Counter | |||||
| Speed | and | |||||
|
|
|
|
| Counter | ||
|
|
|
|
| Memory | ||
Helpful Hint
•The status display will not appear when you press the STATUS/EXIT button during a
