Philips CCA194AT owner manual You have completed the steps on pages, VCR PLUS+ Program

40 Timer Recording With the VCR Plus+ Programming System

Follow the steps below to program a timer recording using the PlusCode programming numbers in your TV guide. Before you begin, make sure:

●The clock has been set. If not, CLOCK MUST BE SET appears.

●Channels are programmed.

●There is a tape in the TV/VCR (make sure the tape’s record tab is intact and the tape is long enough to record the program).

●You have completed the steps on pages 38-39.

POWER		EJECT
SLEEP/WAKE UP	SPEED	MEMORY
REC/OTR		PAUSE/STILL

Complete each step within 60 seconds of completing the previous step. If you don’t, you may return to step 1.

1

Press the COMBI button, then press the VCR PLUS+/ENTER button.

	PLAY		3
REW	STOP	F.FWD
MENU	STATUS/EXIT	CLEAR

1 2 3

CH.

4 5 6

VCR PLUS+ PROGRAM

PLUS CODE : – – – – – – – –

1

TO END PRESS EXIT

2

Press the Number buttons to enter the PlusCode pro- gramming number of the program you wish to record (this number is different for every program). Finally, press the VCR

PLUS+/ENTER button.

VCR PLUS+ PROGRAM

PLUS CODE : 95557 – – –

TO SET PRESS VCR +

TO CORRECT PRESS CLEAR

TO END PRESS EXIT

7		8	9
A.CH		0		VOL.
CABLE/DBS	COMBI
		VCR PLUS+
VAR.SLOW			/ENTER	MUTE
TRACKING			F.ADV	SLOW
SMART		SKIP	INDEX
PICTURE		SEARCH SEARCH

2

3

Press the PLAY/▲ button or the STOP/▼ button to select a ONCE, DAILY, OR WEEKLY recording. Then, press the F.FWD/B button.

●ONCE: The VCR will record a TV program on any day you choose, up to 12 months away.

●DAILY: The VCR will record every day from Monday to Friday

– starting at the same time and recording for the same length of time.

●WEEKLY: The VCR will record on the same day, at the same time, and for the same length of time every week.

VCR PLUS+ PROGRAM

>ONCE

DAILY (MON - FRI)

WEEKLY

SELECT ▲▼ CHOOSE B

TO END PRESS EXIT

Helpful Hints

•You cannot set a timer recording if DEFEAT RECORDING is set to ON. Details are on page 33.

•If CODE ERROR flashes after you enter the PlusCode programming number and press the VCR PLUS+/ENTER button, the number you entered was incorrect (for exam- ple, too short). If this happens, enter the correct number.

•CLASH may flash on the screen after you complete step 2. This means that the timer recording you just pro- grammed and another timer record- ing overlap, and thus the current timer recording will not be carried out.