30 One-Touch Recording

The One-Touch Recording (OTR) function allows you to program an immediate timed recording from 30 minutes to eight hours long without setting the timer.

Before you begin, make sure:

Channels are set up.

There is a tape in the TV/VCR. The record tab must be intact.

1

Use the CH(annel) m/n button or the Number buttons to select the channel you want to record.

2

Press the STOP/EJECT but-

ton on the TV/VCR to stop

4 the OTR.

 

POWER

SLEEP/WAKE UP

PLAY

REWF.FWD

STOP

MENU

STATUS/EXIT

CLEAR

Press the SPEED button until the desired recording speed (SP or SLP) appears on the screen. Details are on page 29.

3

Press the REC(ord)/OTR button repeatedly until the desired recording length appears in the upper right corner of the screen. Recording will begin immediately. The RECORD light will appear.

OTR

LENGTH 0:30

CH12

 

LENGTH : PRESS OTR

CANCEL : PRESS CLEAR

2

3

1 2 3

4 5 6

7 8 9

0ALT. CH

SPEED MEMORY PAUSE/STILL

REC/OTR TRACKING

CH.1

VOL.

MUTE

4

To stop an OTR before recording is finished, press the STOP/EJECT button on the TV/VCR.

Or, press the REC(ord)/OTR button, then press the CLEAR button, then press the STOP/button on the remote con- trol.

Helpful Hints

To check the time remaining for an OTR after the OTR has been set, press the STATUS/EXIT button.

To change the recording length while an OTR is in progress, press the REC(ord)/OTR button until the desired recording length appears on the screen.

You can not pause an OTR.

To cancel an OTR but continue recording, press the REC(ord)/OTR button, then press the CLEAR but- ton.

You cannot record if DEFEAT RECORDING is set to ON. Details are on page 36.

You can change the tape speed with the SPEED button while a recording is in progress, but some distortion may appear on the tape.

Page 30
Image 30
Philips CCB130CN, CCB190CN owner manual One-Touch Recording, Otr