Putting Batteries in the Remote Control

1

Remove the battery compartment lid on the bottom of the remote control by sliding it in the direction of the arrow.

2

Place two AA batteries inside the battery compartment with their + and – ends aligned as indicated.

3

Replace the battery compartment lid.

Recording Prevention

Video cassette tapes have record tabs to ensure that recordings are not accidentally erased.

Before Using the TV/VCR 5

1

2

3

1

To prevent accidental recording, break off the tab with a screwdriver.

2

To record again, cover the hole with cellophane tape.

Using the Remote Control

Point the remote control at the TV/VCR’s remote sensor.

Do not put objects between the remote control and the TV/VCR.

1

2

TV/VCR Maintenance

In this TV/VCR, use only tapes with the mark.

Make sure any light adhesive stick-on notes are removed from the video cassette tape before putting the tape in the TV/VCR. Removable labels like these can jam the TV/VCR.

Periodic maintenance is required to maintain your TV/VCR’s excellent performance. This TV/VCR has an automatic head cleaning system. However, the video heads will eventually require cleaning or replacement. Only an authorized service cen- ter should perform this service.

Helpful Hints

The remote control and its batteries are supplied.

Do not mix alkaline and man- ganese batteries.

Do not mix old and new batteries.

Page 5
Image 5
Philips CCB190CN, CCB130CN Putting Batteries in the Remote Control, Recording Prevention, Using the Remote Control