Philips CCB193AT99 owner manual Real-Time Counter Memory

40 Real-Time Counter Memory

Follow the steps below to reset the real-time counter to zero at a tape location you want to refer to later.

1

Play, fast forward, or rewind a tape to the location that you would like to refer to later. Stop the tape.

2

1,5

POWER SLEEP/WAKE UP

PLAY

REWF.FWD

STOP

Press the STATUS/EXIT button. The real-time counter will

appear on the screen.

01:08 PM	STOP
CH10

SLP 1 : 23 : 45

2

4

MENU

1

4

7

SLOW

SPEED

STATUS/EXIT CLEAR

2	3
5	6	CH.
8	9
0	SURF	VOL.

MEMORY PAUSE/STILL

3

3

While the counter remains on the screen, press the CLEAR button to reset the real-time counter to zero.

0 : 00 : 00

4

While the counter remains on the screen, press the MEM- ORY button so that M appears on the screen. To erase a real-time counter memory, press the MEMORY button so that the M disappears from the screen.

M 0 : 00 : 00

5

To go to a tape location where the real-time counter was reset to zero, press the REW(ind)/s button or the F.FWD/B button when playback is stopped. When the tape reaches the point at which the counter was set to zero, the tape will stop. Press the PLAY/o button to watch the tape.

REC/OTR TRACKING MUTE

Helpful Hints

•The real-time counter memory will not function during Repeat Play mode. Details are on page 37.

•You may only set one real-time counter memory at a time. If you set the real-time counter to zero at a second location, the previous real- time counter to zero setting will be lost.