Philips CCB 092AT owner manual Remote Control Buttons

Remote Control Buttons 23

F.FWD/B Button

When tape playback is stopped, press to fast forward the tape at high speed. During tape playback, press to fast forward the tape while the picture stays on the screen. Details are on page 42.

Press to change the setting of an item in the on-screen menu or press to proceed to the next menu.

SLEEP/WAKE UP Button
Press to set the Sleep Timer. Details are on page 44. Press to set
the Wake Up Timer. Details are on page 45.
POWER Button	POWER		SLEEP/WAKE UP
Press to turn on or off the TV/VCR.
PLAY/▲ Button
Press to play a tape. Details are on page 29. Press to release Search
or Still mode and return to normal playback. Details are on page		PLAY
	REW		F.FWD
42. Press to select an item in the menu.
		STOP

CLEAR Button

Press to erase incorrect data when programming TV/VCR func- tions. Also, press to reset the real-time counter to 0:00:00. Details are on page 41.

Number Buttons

Use to select channels and to program TV/VCR functions (such as setting the clock).

●Cable Users

Enter channel numbers as a two-digit number for the quickest results. For example, to select channel 6, press 0,6. If you only press the Number 6 button, channel 6 will be selected after a brief delay. (There also may be a brief delay when you select channels 10, 11, and 12.) If you want to select channels 100 and above, enter channel num- bers as a three-digit number. For example, to select channel 117, press 1, 1, 7.

●Antenna Users

Enter channel numbers as a two-digit number for the quickest results. You may only select channels 2-69. For example, to select channel 5, press 0,5. If you only press the Number 5 button, channel 5 will be selected after a brief delay.

SPEED Button

Press to select the recording speed (SP or SLP).

ALT. CH (Alternate Channel) Button

Press to return to the TV channel you were viewing immediately before switching to your current channel.

MUTE Button

Press to eliminate the TV/VCR’s sound. Press again to return to the previous volume level.

VOL(ume) m/n Button

Press to adjust the sound level. If you press the VOL(ume) m/n button when the sound is muted, the sound will be restored.

MENU STATUS/EXIT

1 2 3

4 5 6

7 8 9

	0	ALT. CH
SPEED	MEMORY	PAUSE/STILL
REC/OTR	TRACKING

CLEAR

CH.

VOL.

MUTE