Philips CCB 092AT owner manual Timer Recording, Daily

Follow the steps below to program the TV/VCR to record TV programs while you’re away from home. The TV/VCR will turn itself on, record, and turn itself off automatically. Before you begin, make sure:

● The clock is set. If not, CLOCK MUST BE SET appears, fol-

lowed by the SET CLOCK menu.

● Channels are set up.

● There is a tape in the TV/VCR. (Make sure the tape’s record

tab is intact and the tape is long enough to record the pro-

Timer Recording 33

2-3

POWER SLEEP/WAKE UP

gram.)

Complete each step within 60 seconds of completing the previous step. If you don’t, you may start again at step 1.

1

REW

MENU

PLAY

F.FWD

STOP

STATUS/EXIT CLEAR

1

1

4

2 3

5 6

CH.

Press the MENU button.

>	PRIM. SETUP	PRESS B
	VCR PROGRAM
	VCR SETUP
	REMINDER
	BRIGHTNESS
	PICTURE

2

Press the PLAY/▲ button or the STOP/▼ button to select VCR PROGRAM, then press the F.FWD/B button.

VCR PROGRAM

>ONCE DAILY(MON-FRI)

WEEKLY PROGRAM REVIEW

SELECT KL CHOOSE B

TO END PRESS EXIT

3

Press the PLAY/▲ button or the STOP/▼ button to select a ONCE, DAILY, OR WEEKLY recording. Then, press the F.FWD/B button.

●ONCE: The TV/VCR will record a TV program on any day you choose, up to 12 months away.

●DAILY: The TV/VCR will record every day from Monday to Friday – starting at the same time and recording the same channel for the same length of time.

●WEEKLY: The TV/VCR will record the same channel on the same day, at the same time, and for the same length of time every week.

Daily	DAILY PROGRAM (MON-FRI)
	PROGRAM -1 2 3 4 5 6 7 8-

Recording (example)

SELECT PROGRAM NUMBER

TO END PRESS EXIT

Instructions continue on page 34.

7	8	9
	0	ALT. CH	VOL.
SPEED	MEMORY	PAUSE/STILL
REC/OTR	TRACKING		MUTE

Helpful Hints

•With ShowGuard, you don’t have to worry about losing your timer recordings. If the power fails, pro- grammed timer recordings will be restored when the clock is reset. (The clock will reset itself automati- cally if you are using the AUTO CLOCK feature. Details are on pages 15-18. If you are not using the AUTO CLOCK feature, reset the clock manually. Details are on pages 13-14.) The timer recording will not occur only if the timer recording was scheduled to take place during the power failure.

•You cannot set a timer recording if DEFEAT RECORDING is set to ON. Details are on page 37.