1Press m key in idle mode, scroll
:to ADVANCED SET and press
<OK, scroll :to AUTO PREFIX and press <OK.
2DETECT DIGIT is displayed on the <OK to enter.screen. Press
•The last stored detect string is displayed (if any).
3Enter a detect string number (maximum 5 digits) and press <OK
to confirm.
• A validation tone is emitted and the screen returns to previous menu.
4 Press :to scroll to PREFIX. Press <OK to enter.
• The last stored prefix number is displayed (if any).
5Enter the prefix number (maximum 10 digits) and press <OK to confirm.
•A validation tone is emitted and the screen returns to previous menu.
Note
If no detect string (blank) is entered, the prefix number will be automatically added to the predial number after rkey is pressed.
For numbers starting with *, # or P, the prefix number will not be added to the predial number after rkey is pressed.
9.7Change flash time
Flash time (or dial delay) is the time delay by which the line will be disconnected after you press rkey. It can be set to short, medium or long.
The default value of flash time that is preset in your handset should be the best suited for your country network and therefore you should not need to change it.
34
1 Press m key in idle mode, scroll :to ADVANCED SET and press <OK, scroll :to FLASH TIME and press <OK.
2 Scroll :to SHORT, MEDIUM or LONG and press <OK to confirm.
• A validation tone is emitted and the screen returns to previous menu.
9.8 Change the dial mode
The default value for dial mode that is preset in your handset should be the best suited for your country network and therefore you should not need to change it. There are two dial modes: Tone or Pulse.
1Press m key in idle mode, scroll
:to ADVANCED SET and press
<OK, scroll : to DIAL MODE and press <OK.
2Scroll :to TONE or PULSE and press <OK to confirm.
•A validation tone is emitted and the screen returns to previous menu.
9.9Set first ring
When this function is set to Off, the first ring from a voice call will not sound. This is particularly useful in countries where calling line identity is sent after the first ring. Consequently, the phones in the house will not ring when a message arrives.
1 Press min idle mode, scroll :
to ADVANCED SET and press <OK, scroll to FIRST RING and press <OK.
2 Scroll :to ON or OFF and press <OK to confirm.
• A validation tone is emitted and the screen returns to previous menu.
