Set the date and time
1 Press MENU.
2 Select [CLOCK&ALARM] > [DATE/
TIME], then press OK to confirm.
3 Press the numeric buttons to enter the date, then press OK to confirm.
»» On the handset, the time set menu is displayed.
4 Press the numeric buttons to enter the time.
• If the time is in 
/
to select [AM] or [PM].
5 Press OK to confirm.
Set the date and time format
1 Press MENU.
2 Select [CLOCK&ALARM] > [SET
FORMAT], then press OK to confirm.
3 Select [DATE FORMAT] or [TIME FORMAT].
4 Select the setting. Select [DD/MM] or [MM/DD] as the date display and [12 HOURS] or [24 HOURS] as the time display. Then press OK to confirm.
»» The setting is saved.
Display the date and time
1 Press and hold OK.
2 Press and hold OK again to display the handset name.
What is standby mode?
Your phone is in standby mode when it is idle. The standby screen displays the handset name and number/date and time, signal icon, and battery icon.
Check the signal strength
It displays the link status between the handset and base station. The more bars are shown, the better the signal strength is.
•Ensure the handset is linked to the base station before you make or receive calls and carry out the phone functions and features.
•If you hear warning tones when you are on the phone, the handset is almost out of battery or the handset is out of range. Charge the battery or move the handset nearer to the base station.
Switch your handset On/Off
•Press and hold 
to switch off the handset. The handset’s screen turns off.
Note
•• When the handset is switched off, no call can be received.
•Press and hold 
to switch on the handset. It takes a few seconds for the handset to power up.
14EN
