Philips CD290 user manual Install the handset, Set the country/language, Set the date and time

Install the handset

The batteries are pre-installed in the handset. Pull the battery tape off from the battery door before charging.

Caution

•• Risk of explosion! Keep batteries away from heat, sunshine or fire. Never discard batteries in fire.

•• Use only the supplied batteries.

•• Risk of decreased battery life! Never mix different brands or types of batteries.

Note

•• Charge the batteries for 8 hours before first use.

•• If the handset becomes warm when the batteries are being charged, it is normal.

Warning

•• Check the battery polarity when inserting in the battery compartment. Incorrect polarity may damage the product.

The batteries are pre-installed in the handset. Pull the battery tape off from the battery door before charging.

Configure your phone (country dependent)

1	When using your phone for the first time,
2	you see a welcome message.
	Press [OK].

Set the country/language

Select your country/language, then press [OK] to confirm.

»»The country/language setting is saved.

Note

•• The country/language setting option is country dependent. If no welcome message is displayed, it means the country/language setting is preset for your country.Then you can set the date and time.

To re-set the language, see the following steps.

1	Select [Menu] > [Phone setup] >
2	[Language], then press [OK] to confirm.
	Select a language, then press [OK] to
	confirm.

»»The setting is saved.

Set the date and time

Tip

•• To set the date and time later, press [Back] to skip this setting.

1	Select [Menu] > [Phone setup] > [Date &
2	time], then press [OK] to confirm.
	Press the numeric buttons to enter the
3	date, then press [OK] to confirm.
	Press the numeric buttons to enter the
	time.

Note

•• If the time is in 12-hour format, press / to select [AM] or [PM].

4 Press [OK] to confirm.

English

EN 9