Philips CD290 Select the recall duration, Dial mode, Register the handsets, Set the dial mode

Select the recall duration

Ensure that the recall time is set correctly before you can answer a second call. In normal case, the phone is already preset for the recall duration.

You can select among 3 options: [Short], [Medium] and [Long].The number of available options varies with different countries. For details, consult your service provider.

1	Select [Menu] >[Services] > [Recall time],
2	then press [OK] to confirm.
	Select an option, then press [OK] to
	confirm.

»»The setting is saved.

Dial mode

Note

•• This feature only applies to models that support both tone and pulse dial.

Dial mode is the telephone signal used in your country.The phone supports tone (DTMF) and pulse (rotary) dial. Consult the service provider for detailed information.

Set the dial mode

1	Select [Menu] > [Services] > [Dial mode],
2	then press [OK] to confirm.
	Select a dial mode, then press [OK] to
	confirm.

»»The setting is saved.

Note

•• If your phone is in pulse dial mode, press during a call for temporary tone mode. Digits entered for this call are then sent out as tone signals.

Register the handsets

You can register additional handsets to the base station.The base station can register up to 4 handsets.

Auto registration

Place the unregistered handset on the base station.

»»The handset detects the base station and start to register automatically.

»»Registration is completed in less than 2 minutes.The base station automatically assigns a handset number to the handset.

If auto registration fails, register your handset manually to the base station.

1	Select [Menu] > [Services] > [Register],
2	then press [OK] to confirm.
	Enter the system PIN. Press [Clear] to
	make corrections. Press [OK] to confirm
3	the PIN.
	Press and hold on the base station for 5
	seconds.

Note

•• For models with an answering machine, you hear a confirmation beep.

4 Press [OK] to start the registration.

»»Registration is complete in less than 2 minutes.The base automatically assigns a handset number to the handset.

Note

•• If the PIN is incorrect or no base is found within a certain period, your handset displays a notification message. Repeat the above procedure if registration fails.

Note

•• The preset PIN is 0000. No change can be made on it.

English

EN 27