Answer a call
When there is an incoming call, the phone rings. Press
or
to answer the call.
Warning
•• When the handset rings or when the handsfree is activated, keep the handset away from your ear to avoid ear damage.
Note
•• The caller ID service is available if you have registered to the caller ID service with your service provider.
Tip
•• When there is a missed call, a notification message appears.
Turn off the ringer for an incoming call
When the phone rings, press [Silent].
Adjust the earpiece/speaker volume
Press 
/ 
to adjust the volume during a call.
»»The earpiece/speaker volume is adjusted and the phone is back to the call screen.
Mute the microphone
1 Press during a call.
»»The handset displays [Mute on].
»»The caller cannot hear you, but you can still hear his voice.
2 Press again to unmute the microphone.
»»You can now communicate with the caller.
Turn the speaker on or off |
| h |
Press . | Englis | |
|
|
|
Make a second call
Note
•• This service is network dependent.
1 Press | during a call. |
»»The first call is put on hold.
2 Dial the second number.
»»The number displayed on the screen is dialed out.
Answer a second call
Note
•• This service is network dependent.
When there is a periodical beep to notify you of an incoming call, you can answer the call in these ways:
1 Press | and to answer the call. |
»»The first call is put on hold, and you are now connected to the second call.
2 Press 
and 
to end the current call and
answer the first call.
Switch between two calls
You can switch your calls in these ways:
•Press 
and 
; or
•Press [Option] and select [Switch calls], then press [OK] again to confirm.
»»The current call is put on hold, and you are now connected to the other call.
EN 13
