Philips CD6452B manual During the conference call, External call is put on hold automatically

4.6.2How to transfer an external call to another handset

During an external call:

1Press cto initiate an internal call

•The handsets available for intercom will be

displayed and the external call is put on hold automatically.

2Press u/dto select your desired handset

3Press <to call your desired handset

• Your desired handset rings.

4Press ron the called handset to start intercom

Note

You can press cto switch the call between the internal call and the external call.

5Press eon the calling handset

•The calling handset transfers the external call to the called handset.

4.6.3How to make a 3-way conference call The conference call feature allows one external call to be shared with two handsets (in intercom). The three parties can share the conversation and no network subscription is required.

During an external call:

1Press cto initiate an internal call

•The handsets available for intercom will be displayed and the external call is put on hold automatically.

2Press u/dto select your desired handset

3Press <to call your desired handset

• Your desired handset rings.

4Press ron the called handset to start intercom

Note

You can press cto switch the call between the internal call and the external call.

5Long press con the calling handset

•The calling handset, called handset and the external call would be in 3-way conference.

During the conference call:

1Press cto put the external call on hold and go back to internal call

•The external call is put on hold automatically.

2 Press and hold cto establish the conference call again

Note

Any handset hangs up during a conference call will leave the other handset still in connection with the external call.

4.6.4Caller Line Identification (CLI)

Caller Line Identification (CLI) is a special service that you may subscribe from your network operator. If you have subscribed to CLI service and provided that the identity of the caller is not withheld, the number or name of the caller will be displayed when the phone rings so that you may decide whether to answer the call or not. Please contact your network provider for more information on this service.

4.6.5Call waiting

If you have subscribed to Call Waiting service, the earpiece will emit a beep tone to inform you that there is a second incoming call. The number or name of the second caller will also be displayed if you have subscribed to Caller Line Identification service (CLI). Please contact your network provider for more information on this service. To answer the second call, press r.

4.7 How to find a handset

You can locate the handset by pressing pon the base station.

All the handsets registered to the base will produce the paging tone and you can stop the paging by pressing r/ e/ v/ >on the handset or pon the base again.

Using your phone 15