6.6.4.3How to remotely access your answering machine
1Place a call from your external phone to your CD645
2When the answering machine answers the
call and starts playing the outgoing message, press #to enter #
3Enter the
Note
If the PIN is correct, recorded messages would be played back automatically.
However, if the PIN is incorrect, an error tone would be heard, you can retry to enter the remote access PIN again.
If retry PIN is still incorrect, the answering machine will drop the line immediately.
If there are messages, all the new messages will be played immediately and then old messages will be played after a long beep.
4Press the following keys to carry out the desired function
Keys | Description |
|
|
1 | Skip to the previous message |
|
|
2 | Play the message |
|
|
3 | Skip to the next message |
|
|
6 | Delete the playing message |
|
|
7 | Turn on the answering machine |
|
|
8 | Stop message playback |
|
|
9 | Turn off the answering machine |
|
|
# | Enter the remote access code if the |
| answering machine is on and outgoing |
| message is playing. |
|
|
Note
If the answering machine is off, the phone will enter into the remote access mode after 10 rings. User can then enter the
6.6.5 Call screening on Handset
If Call screening is set to On, when there is an incoming message, you can press <to start call screening. If you decide to pick up the call, press r. Once the call has been picked up, the recording will stop automatically.
1Press <to access the main menu
2Press u/dto select Answer Machine
3Press <and u/dto select Ans.
Settings
4Press <and u/dto select Screening
5Press <to select On or Off
6Press <to save the settings
Note
During call screening, user cannot stop the call screening, only rand u/don handset can be used.
6.6.6 Call screening on Base
When the answering machine picks up the call, call screening on base will be turned on if the volume level is not at 00. You can press Vto turn the base volume level to 00 to turn off the call screening on base.
Answering machine | 31 |
