HOW TO USE A WALK/RUN PROGRAM
The 5K program is designed to help you train for a 5K race.
The 10K program is designed to help you train for a 10K race.
The CROSS COUNTRY program is designed to help you train for a race of a length of your choice.
Insert the key into the console.
See GETTING STARTED on page 17.
Select a WALK/RUN program.
Press the WALK/RUN button one, two, or three times to select the 5K, 10K, or CROSS COUNTRY program. When a WALK/RUN program is se- lected, the name of the program will appear in the main display. The words ENTER AGE and the current age setting will then be shown.
When a WALK/RUN program is selected, the ma- trix will show a graph representing the speed set- tings for the program.
Enter your age.
See step 3 on page 18.
Enter your weight.
See step 4 on page 19.
If you have selected the 5K or 10K program, skip to step 6. If you have selected the CROSS COUNTRY program, continue to step 5.
Enter a distance goal.
If you have selected the CROSS COUNTRY pro- gram, the words ENTER DISTANCE and a dis- tance setting of 10 miles will appear in the main display. To change the distance you want to walk or run during your workout, press the + and – but- tons beside the ENTER button. Then, press the ENTER button.
Enter a program time.
See step 8 on page 23. Note: The speed of your workout depends on the program time that you enter.
Press the QUICK START button to start the program.
A moment after the button is pressed, the walking belt will begin to move at the calculated start speed. Hold the handrails and begin walking.
If the speed of the walking belt is too fast or too slow, you can change it by pressing the SPEED + and – buttons. Note: This will change the length of time of your program.
Change the incline of the INCLINE TRAINER as desired.
See step 7 on page 19.
Follow your progress with the main display. See THE MAIN DISPLAY on page 15.
Measure your heart rate if desired.
See THE PULSE SENSOR on page 16.
When the program is completed, remove the key.
See step 10 on page 19.
26
