English
RECORDING
Autostart recording from external CD player
CD-SYNC
OPEN // CLOSE | PLAY // PAUSE | STOP | REC | RECORD |
|
|
| EXT |
|
|
|
|
|
|
| TYPE | FINALIZE | ERASE |
|
|
|
|
| ||
|
|
|
|
|
| SOURCE |
|
|
| |||
|
|
|
|
|
|
|
|
|
| |||
|
|
|
|
|
|
|
|
|
| CDR |
|
|
|
|
|
| ANALOG |
| RW |
|
|
|
|
|
|
|
|
|
|
|
| CDR 77X | AUDIO CD RECORDER |
|
| |||
|
|
|
|
|
|
|
|
|
| |||
|
|
|
| PROG | SHUFFLE | DISPLAY |
|
|
| PHONES | ||
|
|
|
|
| SCROLL | REPEAT | DJ MODE | |||||
|
|
|
|
|
|
|
| |||||
The
Preparing for autostart recording
1 Make sure the disc is absolutely free of scratches and dust particles.
2 Press EXT(ernal) SOURCE repeatedly until (depending on the digital connection used):
➜DIGITAL I, OPTICAL I or ANALOG lights up and DIGITAL 1, OPTICAL or ANALOG will appear on the display.
REM REC | TIME TRACK | TOTAL REM | TRACK TIME | STEP |
SYNC MANUAL |
| RECORD |
| PROG |
DIGITAL I | CD | CHANGER | CD | SHUFFLE ALL |
OPTICAL I | RW |
| RW | REPEAT |
ANALOG |
| SCAN TRACK | ||
|
|
| ||
3 With the CD recorder stopped, | press REC TYPE four times | |||
if you wish to record a complete disc or program.
➜d and SYNC will start to flash and the display will show REC EXT DISC and WAIT followed by the track number, the total remaining time and START SOURCE.
REM | REC | TIME TRACK | TOTAL REM | TRACK | TIME |
|
| STEP |
SYNC MANUAL |
| RECORD |
|
| PROG |
| ALL | |
DIGITAL I |
| CD | CHANGER |
| CD | SHUFFLE | ||
OPTICAL I |
| RW |
|
| RW | REPEAT | TRACK | |
ANALOG |
|
|
| SCAN | ||||
|
|
|
|
| ||||
•If input label (DIGITAL I) flashes, the digital connection is incorrect.
Start recording
1 To start recording, press PLAY on the selected source.
➜The CD recorder automatically starts to record and d lights up continuously. The track number and track time will appear on the display.
•If, however, you start the source during a track,
•To check the remaining recording time on the CDR(W), press DISPLAY. (This can also be done during recording.)
•The EASY JOG/ENTER key can be used to adjust the recording level.
•The recorder stops automatically.
2 To stop recording manually, press STOP on the CD recorder.
➜UPDATE lights up and SYNC and d go out.
•If STOP 9 is pressed within 3 seconds after pressing PLAY, no recording will take place.
•To interrupt recording, press PAUSE on the CD recorder.
➜d starts to flash. (Autostart recording is disabled.) To resume, press RECORD on the CD recorder.
After recording the display will show UPDATE for several seconds.
Note:
-Recordings from DAT, DCC or analog sources will only stop after 20 seconds of silence.
-Auto track is always active.
Important:
If you want to play the recorded CDR disc on a regular CD player, it must be finalized. See finalizing discs.
Finalized CDRW discs play only on CDRW compatible CD players.
For recording from CD changers always use REC EXT DISC.
22
