Skip track.
Fast backward/forward playback
dSOURCE
Select audio source.
eEQ
Select equalizer (EQ) settings.
fOFF / 
/ 
Turn the unit on or off.
Mute or restore volume.
3 Get started
English
Caution
Use the controls only as stated in this user manual.
Always follow the instructions in this chapter in sequence.
model and serial number of your apparatus.The model number and serial number are on the bottom of your apparatus.Write the numbers here:
Model No. __________________________
Serial No. ___________________________
Install the car audio
These instructions are for a typical installation.
make the corresponding adjustment. If you have
your Philips car audio dealer.
Caution
This unit is designed for negative ground (earth) 12 V DC operation only.
Always install this unit in the car dashboard. Other locations can be dangerous as the rear of the unit heats up during use.
the ignition is off.
Ensure that you connect the yellow and red power supply leads after all other leads are connected.
Ensure that all loose leads are insulated with electrical tape.
Ensure that the leads do not get caught under screws orin parts that will move (e.g. seat rail).
Ensure that all ground (earth) leads are run to a common ground (earth) point.
Use only the supplied mounting hardware for a safe and secure installation.
EN 9
