Philips CGA7740N manual Routing, Static route 4.11 SET UP WiZARD Getting started, RIP parameters

Address of your server, such as a web server, and then click on the port Routing table option HTTP Port 80 so users can access your web server from the

Internet connection.

This DNS feature is powered by a DDNS service provider. With a DDNS connection you can host your own web site, email server, FTP site, and more at your own location even if you have a dynamic IP address. (Default : Disable)

4.10 Routing

These pages define routing related parameters, including static routes and RIP (Routing Information Protocol) parameters.

Static route

4.11 SET UP WiZARD

Getting started

1- Click "Add" to add a new static route to the list

2- Click "SAVE SETTINGS" to save the configuration

RIP parameters

RIP sends routing-update messages at regular intervals and when the network topology changes. When a router receives a routing update that includes changes to an entry, it updates its routing table to reflect the new route. RIP routers maintain only the best route to a destination.

After updating its routing table, the router immediately begins transmitting routing updates to inform other network routers of the change.

Make sure that you have a working ADSL subscription and that the ADSL Wireless Base Station is connected to the ADSL phone line. You can verify that the cable is connected correctly by looking at the ADSL light on the top of the ADSL Wireless Base Station. The ADSL light should be on solid after approximately 1 minute.

Wireless settings

In step 2 you can change the Wireless settings of the ADSL Wireless Base Station. For easy installation it is advised to keep the default settings. If you later would like to change any of the wireless settings you can do so via the menu in the ADSL Wireless Base Station.

18 Configuring the Wireless ADSL Modem Router