Mount in the dashboard 2

Note

‡Check wire connection before you mount the unit into a car.

‡If preset radio stations are lost when the ignition key is turned OFF and then back ON, reconnect the red leads crosswise to the yellow ones.

1If the car does not have an on-board drive or navigation computer, disconnect the negative terminal of the car battery.

2Ensure that car dashboard opening is within these measurements: a

3Slide the unit into the dashboard until a click sound is heard. b

4Attach the trim plate. c

5Reconnect the negative terminal of the car battery.

‡

To adjust screen brightness/contrast, press

 

/

on the remote control, then press

 

,

, or .

‡

To turn off the unit, press for 3 seconds

Set date and time

1Touch the upper left corner to display main menu.

2Touchin the middle right side of the screen.

» The second main menu is displayed.

Turn on

Caution

‡Risk of road accidents! Never watch video or adjust settings while you drive.

1Press to turn on the unit.

»The available OSD (On-Screen Display) languages are displayed.

2Touch a language to select.

»The OSD language is changed to the selected language immediately.

3Touch [Settings].

4Touch [Time].

» The date/time setup menu is displayed.

Set date

1Touch [Date].

2Touch on the displayed date information. » A submenu is displayed.

Page 8
Image 8
Philips CID2680/00 quick start Set date and time, Turn on, Mount in the dashboard