PROGRAMMING A TELEVISION WITH THE ON-SET KEYBOARD
WRITING TV MEMORY
WITH THE
After the Memory has been read from one television, the
BEGIN
1
EXTERNAL
SPEAKER
75Ω | Typical rear jack |
ANT/ | |
CABLE | panel of ITV |
|
ON/OFF Slide Switch
SMART
PLUG
Plug one end of the cable into the jack provided on the SmartLoader. Then plug the other end into the jack provided on the back of the TV. The TV jack is next to the Antenna Input terminal.
Push the Slide Switch to the ON position on the SmartLoader. If the TV is currently off, it should turn on within 15 seconds.
Within 20 seconds, the SmartLoader
LED
3
2
PHILIPS
SMARTLOADER 99
Copyright PCEC 1999
System Version D.0
PN 3135 019 01681
PRESS POWER TO BEGIN
Philips SmartLoader 99
System Version D.0
Press CH/UP to Write TV
should appear on the TV screen. If the display does not appear, check connections and push the Slide Switch to the ON position again. If there is still no response from the SmartLoader, replace its
Press the POWER button on the front of the TV to display the
Press the CH/UP button on the front of the TV to write the memory to the television.
6 | STEREO |
POWER
Press Power to Exit System
Stored Memory Type 01, 04
Philips SmartLoader 99
System Version D.0
Press CH/UP to Confirm Write Press CH/DN to Abort Press Power to Exit System
Stored Memeory Type 01, 04
The screen will ask “Press CH/UP to Confirm Write,” “Press the CH/DN to Abort,” or “Press the Power to Exit System.” Press the CH/UP button to confirm and begin
MENU
– VOLUME + | CHANNEL |
POWER
4
Philips SmartLoader 99
System Version D.0
Press CH/UP to Confirm Write Press CH/DN to Abort Press Power to Exit System
the procedure.
The screen will indicate “Writing Block XX of XX” while the Clon99- BK SmartLoader is downloading the data.
The display will then read “Finished Writing Memory” when the proce- dure has been completed.
Press the Power button on the front of the TV to EXIT the system.
8
6
5
Writing Block 23 of 63
Philips SmartLoader 99
System Version D.0
Press CH/UP to Confirm Write Press CH/DN to Abort Press Power to Exit System
Finished Writing Memory
10