PROGRAMMING A TELEVISION’S INTERNAL MEMORY
WRITING TV MEMORY
After the Memory has been read from one television, the
BEGIN
Plug one end of the cable into the jack provided on the SmartLoader. Then plug the other end into the jack provided on the back of the TV. The TV jack is next to the Antenna Input terminal.
Push the Slide Switch to the ON position on the SmartLoader. If the TV is currently off, it should turn on within
|
| 1 |
|
|
| EXTERNAL |
|
|
| SPEAKER | Typical rear jack |
|
| 75Ω | |
|
| ANT/ | panel of ITV |
|
| CABLE | |
ON/OFF Slide Switch |
|
| |
| SMART |
| |
|
|
| |
|
| PLUG |
|
2 | 3 | PHILIPS | |
| |||
|
| ||
|
| SMARTLOADER 99 | |
|
| Copyright PCEC 1999 | |
|
| System Version D.0 | |
|
| PN 3135 019 01681 | |
|
| PRESS POWER TO BEGIN |
15 seconds.
Within 20 seconds, the SmartLoader
Press the POWER button on the remote to display the
With the Setup Menu visible, press the Number 2 button on the Remote Control to select the 2nd option “Write TV With Settings” or press the Number 3 button to select the third option “Write TV Without Settings.”
The screen will ask “Write?” Press the 0 button on the remote to confirm and begin the procedure.
The screen will indicate “Writing Block 24 of 63” while the
The display will then read “Finished Writing Memory” when the procedure has been completed.
LED
SLEEP |
|
| RECALL |
| - | SELECT | + |
| M | ||
|
| A/CH |
|
VOL |
|
| CH |
| MUTE |
| |
A | B | C | 5 |
| E | F | G |
RESET 1 2 3
4 5 6
CC
7 8 9
CH GDE | 0 |
POWER TV TV DCM
GUEST SETUP SETUP 6
4
7
8
Philips SmartLoader 99
System Version D.0
1 - Read TV
2 - Write TV With Settings
3 - Write TV Without Settings
4 - Erase SmartLoader Memory
5 - System Test
6 - Exit SmartLoader
Stored Memory Type 01, 04
Philips SmartLoader 99
System Version D.0
1 - Read TV
2 - Write TV With Settings
3 - Write TV Without Settings
4 - Erase SmartLoader Memory
5 - System Test
6 - Exit SmartLoader
Write? Press 0 to confirm
| Philips SmartLoader 99 |
| System Version D.0 |
1 | - Read TV |
2 | - Write TV With Settings |
3 | - Write TV Without Settings |
4 | - Erase SmartLoader Memory |
5 | - System Test |
6 | - Exit SmartLoader |
| Writing Block 23 of 63 |
| Philips SmartLoader 99 |
| System Version D.0 |
1 | - Read TV |
2 | - Write TV With Settings |
3 | - Write TV Without Settings |
4 | - Erase SmartLoader Memory |
5 | - System Test |
6 | - Exit SmartLoader |
| Finished Writing Memory |
7