7 Wall mount
Before you mount your SoundBar on the wall, read all the safety precautions (see 'Important' on page 4).
Make sure that you use the screws andbrackets specified by the manufacturer or sold with the apparatus. Secure the wall mount to a wall that can support the combined weight of the product and the wall mount. For information about the size of the keyhole on your SoundBar’s mount, see the Quick Start Guide.
0.12 - 0.14”
> 0.98”
Note
•• Koninklijke Philips Electronics N.V. bears no responsibility for improper wall mounting that results in accident, injury or damage. If you have any query, contact Philips Consumer Care in your country.
8Product specifications
Note
•• Specifications and design are subject to change without notice.
Amplifier
•Total output power: 60W RMS (30% THD)
•Frequency response: 20
•
•Input sensitivity:
•AUX: 600 mV
•Music iLink: 250 mV
Audio
•S/PDIF Digital audio input:
•Coaxial: IEC
•Optical:TOSLINK
Main unit
•• Power supply:
•• Power consumption: 20 W
•• Standby power consumption: ≤ 0.5 W
•• Speaker impedance: 4 ohm woofer, 4 ohm tweeter
•• Speaker drivers: 25 x 120 mm (1 x 5") woofer, 38 mm (1.5") tweeter
•• Frequency response: 150
•• Dimensions (WxHxD): 708 x 47 x 65 mm
•• Weight: 1.03 kg
Subwoofer
•Impedance: 8 ohm
•Speaker drivers: 130 mm (5.25") woofer
•Frequency response: 20
•Dimensions (WxHxD): 165 x 240 x 295 mm
•Weight: 2.6 kg
•Cable length: 3 m
Remote control batteries
12 EN
• 1 x CR2025