Philips CT9A9KBRN manual Switch calls Network dependent, Call Handsfree, IP Dial China & HK only

If you wish to separate one member from the call, you can select Split conference call during the multi-party

call. To disconnect a member from the call, select End call in conference.

Switch calls (Network dependent)

When you have one active call and one call on hold, you can press L Options, then select Swap to switch

between the 2 calls.

Call Handsfree

During a call, press L Options and select Handsfree.

When the headset is plugged into the phone, you cannot activate handsfree mode.

IP Dial (China & HK only)

You may select IP dial. When you select IP dial option, the mobile phone will automatically add the IP special service number preset by you in front of the phone number and then make IP dial. You can also long press ( to activate IP dial.

When you have entered several IP special service numbers, you will be prompted to verify them to avoid adding them repeatedly.

Answer a call

Press ( to answer a call.

Reject a call

Press ) to reject a call.

Answer a second call (Network dependent)

If you have activated Call waiting, you will be alerted when there is a second incoming call. You can:

1.Press ( to answer the second call. The current call will be put on hold automatically.

2.Press ) to reject the second call and continue with your current call.

3.When there is one active call and one call on hold, you can press L Options to carry out the following operations:

• Swap	• Establish	• Handsfree
	conference call
• Audio device	• Mute	• End held calls
(if applicable)
• End active call	• Send SMS	• Record
• View contacts

Calling 15