USING THE ALARM
GENERAL
Two different alarm times can be set. This can be useful when you need to be
woken up at a different time e.g. during the week and at the weekend, and you
can set different wake-up modes:
•Tuner mode.
•iPod/USB mode.
•Nature sound mode.
•Buzzer mode. The gentle wake buzzer alarm increases its beep tone frequency
within seconds.
SETTING THE ALARM TIME AND MODE
(See 3)
1In any mode, press and hold 1 ALM or 2 ALM for two seconds.
™
AL1
/
AL2
icon and the hour digits flash.
2
Hold down or press ¡1/2™ repeatedly to set and adjust the hours.
3Press 1 ALM or 2 ALM
to confirm.
™
AL1
/
AL2
icon and the minutes digits flash.
4
Hold down or press ¡1/2™ repeatedly to set and adjust the mintues.
5Press 1 ALM or 2 ALM
to confirm.
™
The icon for the current alarm mode flashes.
6Press
¡1 2™
/
SOURCErepeatedly to select your desired alarm mode.
•For Nature sound mode, press ALBUM/PRESET -/+
1/ 2
to select your desired
nature sound track.
™
At the set alarm time, the selected sound source or buzzer will switch on
automatically.
Helpful hints:
–
If you have selected TUNER alarm mode,make sure you have properly tuned to a
station before turning off the set.
–
If you have selected iPod/USB alarm mode,make sure you have connected the com-
patible iPod player or USB device, or the buzzer mode will be selected automatically.
–
To check the alarm time setting for AL1 or AL2, press 1 ALM or 2 ALM.
DC200_Eng 2008.2.15 11:20 Page 9