3 Get started
Caution
Use of controls or adjustments or performance of procedures other than herein may result in hazardous radiation exposure or other unsafe operation.
Prepare the remote control
Caution
Risk of explosion! Keep batteries away from heat,
Danger of explosion if battery is incorrectly replaced.
English
Always follow the instructions in this chapter in
If you contact Philips, you will be asked for the model and serial number of this apparatus.The model number and serial number are on the bottom of the apparatus.Write the numbers here:
Model No. _____________________________
Serial No. ______________________________
To insert the remote control battery:
1Open the battery compartment.
2Insert 2 AAA batteries with correct polarity (+/-) as indicated.
3Close the battery compartment.
a
Connect power
Caution
Risk of product damage! Make sure that the power voltage corresponds to the voltage printed on the back or underside of the apparatus.
Risk of electric shock! When you unplug the AC cable, always pull the plug from the socket. Never pull the cord.
Before you connect the AC cable, ensure that you have completed all other connections.
Connect the AC cable to the wall outlet.
b
c
Note
If you are not going to use the remote control for a long time, remove the batteries.
Do not use old and new or different types of batteries in combination.
Batteries contain chemical substances, so they should be disposed of properly.
EN 11
