www.philips.com/faqs/dect
28
www.philips.com/faqs/dect
29

Playing ICM

ICM will be played back in the sequence they were recorded. A tone will be played before each message.
Press the PLAY key. The oldest new message will begin.
During message playback, you have the following options:
1. Press the NEXT key to skip the current message and play the next message
2. Press the PREVIOUS key to repeat the current message.
3. Press the PREVIOUS key twice to play the previous message.
4. Press the STOP key to stop playing messages.

Deleting an ICM

Press the DELETE key while listening to a message.

Deleting all ICMs

1. Press the DELETE key for 2 seconds. dL will blink on the display.
2. Press the DELETE key again to permanently delete all old and new messages or
press the STOP key to cancel the deletion.
Call screening
The answering machine’s speaker turns on when it answers a call. It allows you to hear the caller before you pick up
the call.
If you do not want to listen to the call during the message recording, turn the volume level to the minimum. (See
next section.)
Volume adjustment
You can adjust the volume for and during call screening and message playback.
Press the VOLUME UP key to increase the volume.
Press the VOLUME DOWN key to decrease the volume.
Note: The messages deleted cannot be recovered. The message will be permanently deleted on the rst press of the
DELETE key.
Note: Messages deleted cannot be recovered.
Note: Call screening will be turned off when the volume is turned to minimum.
DECT 225 ANSWERING MACHINE