Philips Dlnzw manual Cleaning, Once a Month Razor Heads Every Week Razor Heads

8ENGLISH

Cleaning

ENGLISH 9

Once A Month: Razor Heads

Every Week: Razor Heads

◗ The easiest and most hygienic way to clean the razor heads is to rinse them every week with hot water. Water from the tap should be on a hot setting but BE CAREFUL TO TEST WATER FIRST SO AS NOT TO BURN OR SCALD HANDS.

◗Regular cleaning guarantees better shaving results.

◗You may also quickly rinse your razor heads after each use.

1Always turn razor OFF, remove the

charging plug from outlet and remove cord

from razor before cleaning.

C

C

\

◗Do not mix up the cutters and combs as the shaving performance may be adversely affected for several weeks before optimal shaving performance is restored.

1Turn razor OFF, remove the charging plug from the outlet and cord from the razor.

2Press the Razor Head Release Button and open the Razor Head Assembly.

3Turn the wheel counterclockwise and remove the retaining frame.

C
		2	Press the Razor Head Release Button, flip
			open the Razor Head Assembly.
C
		3	Clean razor heads and hair chamber by
			running under hot water.
		4	Close the Razor Head Assembly and shake
C			off excess water.
		5	Open Razor Head Assembly again and
			leave open to air dry.
	6		You may also clean the hair chamber
			without water by using the supplied brush.

4Remove and clean one set of heads at a time.

C 5 Separate the cutter from the comb and rinse clean under hot water.

◗ Do not clean more than one cutter and comb at a time, since they are all matching sets. If you accidentally interchange the cutters and combs, it could take several weeks before optimal shaving performance is restored.

C 6 Replace the set back into the Head

Assembly in such a way that the sides with

the little holes point to the middle of the shaving unit.

◗Make sure that the two pointy edges of the head fit exactly into the recesses.

Downloaded from www.Manualslib.com manuals search engine