10ENGLISH
C |
7Repeat the process for the other two sets of cutters and combs.
8Replace the frame.
9Press down and turn wheel clockwise until it locks into place.
10Replace the Razor Head Assembly back on razor.
◗If the razor heads have been properly inserted, a shiny circle is visible in the middle of the razor head assembly.
ENGLISH 11
C 4 | Lubricate the Trimmer teeth with Norelco |
| Razor Lubricant (model AL80) or with one |
| drop of mineral oil. |
5 | Close Trimmer by sliding Trimmer switch |
| down. |
This razor has no other
Any other service should be performed by an
Authorized Norelco Service Location.
Assistance
Once A Month: Razor Heads
◗For optimum performance, razor cutters and combs should be cleaned in a degreasing liquid (e.g. Norelco Razor Cleaner, Model RC1776, or alcohol) and lubricated with Norelco Razor Lubricant, model AL80, or one drop of mineral oil (in the center of the head).
Every Six Months:Trimmer
1Turn razor OFF.
2Push Trimmer Slide Switch up to pop up
Trimmer.
C 3 Clean Trimmer with the brush.
For assistance or the Authorized Norelco Service Location nearest you, call toll free:
or visit our website: www.norelco.com
Authorized Norelco Service Location information is available 24 hours a day, 7 days a week.
Downloaded from www.Manualslib.com manuals search engine
