24ENGLISH
C 4 Clean outside of Razor Head Assembly by running under hot water.
5 Close the Razor Head Assembly and shake off excess water.
C 6 Open Razor Head assembly again and leave open to air dry.
NOTE: Do not wipe or dry the shaving heads | |
with a towel or tissue.This could damage the | |
shaving heads. | |
C 7 | If the shaving unit becomes detached from |
| the razor, you can easily reattach it. |
8 You may also clean the hair chamber | |
| without water by using the supplied brush. |
Once A Month: Razor Heads | |
Do not mix up the cutters and combs as the | |
shaving performance may be adversely affected | |
for several weeks before optimal shaving | |
performance is restored. | |
1Turn razor OFF, remove the charging plug from the outlet and cord from the razor or charging stand.
C 2 Press the razor head release button to open the razor head assembly.
ENGLISH 25
C 3 | Turn the wheel counterclockwise (1) and |
| remove the retaining frame (2). |
C 4 | Remove and clean one set of cutters and |
| combs at a time. |
C 5 | Separate the cutter from the comb and |
| rinse clean under hot water. |
Do not clean more than one cutter and comb at | |
a time, since they are all matching sets. If you | |
accidentally interchange the cutters and combs, it | |
could take several weeks before optimal shaving | |
performance is restored. | |
C 6 | Replace the set back into the Razor Head |
| Assembly so that the ‘wings’ on the comb |
| fit within the brackets located towards the |
| center of the Assembly. |
The set will only fit into the Razor Head Assembly | |
if the ‘wings’ are between the brackets. Make sure | |
that the two pointy edges of the head fit exactly | |
into the recesses. | |
7Repeat the process for the other two sets of cutters and combs.
8Replace the frame.
