Installation Instructions

1 Attention: The new appliance may only be installed and connected by

aregistered expert.

Please comply with this. If you do not, any damage resulting is not cov- ered by the warranty.

1 Safety information for the installer

The electrical installation is to be set up so that the appliance can be isolated from the mains with a minimum 3mm all-pole contact sepa- ration.

Suitable separation devices include e.g. cut-outs, fuses (screw fuses are to be taken out of the holder), RCD’s and contactors.

Anti-shock protection must be provided by the installation.

The built-in unit must meet the stability requirements of DIN 68930.

Built-in ovens and built-in cooking surfaces are fitted with special connection systems. For safety reasons, they must only be combined with appliances from the same manufacturer.

40

Page 40
Image 40
Electrolux B1180-4 manual Safety information for the installer, Registered expert