Connect the AC power adaptor to:
the DC IN socket at the back of the docking speaker.
the wall outlet.
Turn on
Press and hold 
on the main unit for 2 seconds.
»The 
/ LED indicators light up.
Switch to standby mode
In the following situation, the docking speaker switches to standby mode:
Press and hold 
for 2 seconds again; or The system is idle for 15 minutes.
»In standby mode, the LED indicators light off.
Note
In standby mode, if you press 
on the main unit or 
/ 
on the remote control, the docking speaker switches to the corresponding selected source.
4 Play
Play from iPod/iPhone/iPad
You can enjoy audio from iPod/iPhone/iPad through this docking speaker.
Compatible iPod/iPhone/iPad
The docking speaker supports the following iPod/iPhone/iPad models:
Made for.
iPod touch (1st, 2nd, 3rd, and 4th
iPod nano (1st, 2nd, 3rd, 4th, 5th, and 6th
iPhone 4S iPhone 4 iPhone 3GS iPhone 3G iPhone iPad 2 iPad
Listen to the iPod/iPhone/iPad
Philips DockStudio app brings a suite of new features to your docking speaker.To enjoy more features, you are recommended to install this free application.
1Insert your iPod/iPhone/iPad into the dock.
»The docking system switches to Dock source automatically.
»The orange LED indicators light up.
7EN
