MODE
Three different modes (SAT, VCR, TV)
are selected by pressing the "MODE"
button. The mode selected is the one
with the lighted LED.
RECORD
Press once to start a recording.
REWIND
When tape playback is stopped, press to
rewind at high speed. During tape play
back, press to rewind the tape while the
picture stays on the screen.
STOP
Press to stop the tape.
0-9
Allows direct number entry for tuning to
a channel. Tuning occurs immediately
after the channel is entered, or you can
press OK after entering the third digit to
tune immediately to the channel.
16
REMOTE CONTROL USE - VCR
Next, go to On Screen Installation on page 19.
POWER
Press to turn VCR on or off.
FF
When tape playback is stopped, press
to advance the tape at high speed.
During tape playback, press to advance
the tape while the picture stays on the
screen.
PLAY
Press to play a tape.
▲ ▼
▲▼for channel surfing.
SMART HELP
This remote
control will operate
most TVs and VCRs. See
Programming the Universal
Remote on page 17.