Philips DSX 5350 user manual TV Codes, Programming the Universal Remote Control, Automatic Search

PROGRAMMING THE UNIVERSAL REMOTE CONTROL

MANUALLY SETTING THE REMOTE TO OPERATE A TV OR VCR

Your remote control may operate your TV or VCR (TV/VCR). If the remote control doesn’t operate your TV/VCR now, follow the steps below.

Point the remote control at your TV/VCR and press the MODE button until the TV or VCR LED lights. Then, press

the POWER button. If your TV/VCR turns on or off, try the other TV/VCR function buttons. If your TV/VCR doesn’t turn on or off, or if the other buttons don’t work, go to step 2.

Find the brand of your TV/VCR on the accompanying list, and remember the four digit number beside it.

Press the MODE button until the TV or VCR LED lights.

Press and hold the number 1 button and the number 3 button for 3 seconds. The LED will blink twice and remain on.

Enter the 4-digit code within one minute. The LED will blink after each button press. Note: If the 4-digit code is not entered within one minute, the LED will turn off and the remote control will return to the previously programmed code.

After a valid 4-digit code has been entered, the LED will turn off and blink twice to confirm the new 4-digit code has been programmed. The LED will then turn off.

If an invalid 4-digit code has been entered, the LED will turn off and then display a long Blink.

Press the POWER button.

If the remote control works your TV/VCR, you’re finished. If the remote control still doesn’t work your TV/VCR, repeat steps 2-7. If your TV/VCR brand has more than one 4-digit code, try using the next code number.

If the remote still does not operate your TV/VCR, follow the Automatic Search steps below.

AUTOMATIC SEARCH

Turn on your TV or VCR. Point your remote control toward the remote sensor on your TV/VCR. Press and hold the number 1 button and the number 3 button for three seconds. The LED will blink twice and remain on.

Press the POWER button. The LED will turn off. Note: If the Power button is not pressed within 1 minute, the remote will return to the previously programmed code. The automatic search will begin after the Power button has been released.

Each time a code is transmitted, the LED will blink. This process could take several minutes.

When the correct code is found, the TV/VCR should turn off. Immediately press the POWER button. The LED will blink twice, then turn off. If all codes have been tried and the TV/VCR has not turned on or off the LED will stay on briefly, then turn off.

Note: To stop the search process at any time, press any button other than the POWER button. The LED will give a long blink and turn off.

SMART HELP

The remote may only operate some features

of your TV or VCR. For example, the remote control may turn on the TV power, but it may not change channels at the TV.

When you replace the batteries in the remote control, you may have to program the remote control again. Remember to point the remote control toward the TV or VCR during the Automatic Search.

There is no guarantee that the remote control will work your TV or VCR.

TV CODES

AOC		0046, 0057	Brockwood	............................0046	Crown		0066, 0207	......................................		0046, 0181
Admiral		0120, 0490	Broksonic	0263, 0490	Curtis Mathes		0087, 0057,	Envision		0057
Aiko		0119	CXC	0207	..0043, 0066, 0074, 0078, 0081,			Fisher		0181
Akai		0057	Candle	0057, 0083	..0083, 0120, 0172, 0181, 0193,			Fujitsu		0206, 0710
Alaron		0206	Carnivale	0057	......................................		0478, 0774	Funai		0207, 0198, 0206
Ambassador		0204	Carver	0081	Daewoo	0119, 0046, 0478,		Futuretech		0207
America Action		....................0207	Celebrity	0027	..................................................		0066	GE	0048, 0074, 0078, 0205,
Ampro		0778	Cineral	0478, 0119	Daytron		0046	..............	0478, 0120, 0162, 0309,
Anam		0207	Citizen	0083, 0057, 0066,	Denon		0172	..............................................		0774
Audiovox	0119, 0207, 0478		......................................	0087, 0119	Dumont		0044, 0046	Gibralter		0044, 0046, 0057
Baysonic		0207	Concerto	0083	Dwin		0747, 0801	GoldStar0205, 0046, 0057, 0083
Belcor		0046	Contec	0207	Electroband		0027	Gradiente		0083, 0080
Bell & Howell		0043, 0181	Craig	0207	Emerson	0263, 0207, 0205,		Continued on next page.
Bradford		0207	Crosley	0081	....0206, 0490, 0204, 0309,0066,

17