
CONNECTING TO YOUR EXISTING EQUIPMENT (CONT’D)
Unplug all equipment from the AC outlet before making connections.
IF YOU HAVE A
TV AND A VCR
Refer to the illustration at right:
Connect the Satellite Receiver A/V jacks to the VCR’s A/V IN jacks. Connect the red cable to the red jacks, the white cable to the white jacks, and the yellow cable to the yellow jacks.
Audio cables R L
Video cable
Connect the VCR’s A/V OUT jacks to the TV’s A/V IN jacks.
Connect TV, VCR or other equipment to AC outlet.
Switch on your TV first and select the appropriate channel or A/V mode depending on the connection chosen in step 2. Refer to the user manuals for your TV and VCR to select proper channel or A/V mode (AUX/VCR,
Rear of VCR
AUDIO | ANT | |
| L | IN |
OUT | IN |
|
| R |
|
VIDEO | OUT | |
OUT | IN | CH3 CH4 |
AUDIO | ANT |
| ||
LR | L | IN | ||
L | ||||
|
| L |
| |
OUT | IN |
|
|
IN | LLR | R | R |
| L |
|
|
VIDEO
OUT
CH3 CH4
OUT IN
Video cable
Audio cables
Rear of TV
IN
VHF/UHF
IN
VIDEO
LL | L |
AUDIO
R | R |
SMART HELP
• If the audio and video jacks on your TV are not
sure you connect the audio/video out jacks on the Satellite Receiver to the audio/video in jacks on the TV. Connect right jacks to right jacks, and left jacks to left jacks.
• If your VCR or TV does not have audio and video jacks, use RF coaxial cables for connections instead. Connect the RF coaxial cable to the TV/VCR jack on the Satellite Receiver and to the RF or ANTENNA IN jack on the VCR.
Then, connect a second RF coaxial cable to the ANTENNA OUT or RF OUT jack of the VCR and to the ANTENNA IN, RF in, or UHF/VHF IN jack of the TV.
Next, go to Inserting Your Access Card on page 12.
11