Philips DVD501AT warranty Remote Control Setup, Putting Batteries in the Remote Control

Models: DVD501AT

1 52
Download 52 pages 58.79 Kb
Page 7
Image 7

Putting Batteries in the Remote Control

1

Remove the battery compartment lid on the bottom of the remote control by pressing the tab, then lifting the lid.

2

Place two AA batteries inside the battery compartment

with their + and – ends aligned as indicated.

3

Replace the battery compartment lid.

Using the Remote Control

Point the remote control at the DVD Player’s remote sensor (see page 14) when using the remote control to operate the DVD Player.

Do not put objects between the remote control and the DVD Player.

Recycling Guidelines/Battery Safety

Your new product and its packaging contain materials that can be recycled and reused. Specialized companies can recycle your product to increase the amount that needs to be properly disposed.

Your product uses batteries that should not be thrown away when depleted but should be disposed of as small chemical waste. Please find out about the local regulations on disposal of your old product, batteries, and packaging whenever you replace existing equipment.

Remote Control Setup 7

1

2 3

Helpful Hints

The remote control and its batteries are supplied.

Do not mix alkaline and man- ganese batteries.

Do not mix old and new batteries.

Page 7
Image 7
Philips DVD501AT warranty Remote Control Setup, Putting Batteries in the Remote Control, Using the Remote Control