DVD
AUDIO CD
Quick Disc Playback 15
VIDEO CD
2,3
There are many playback features and options available on Discs. After familiarizing yourself with the DVD Player as described on pages
1 Press the POWER button to turn on the DVD Player. Turn on your TV. Set it to the correct Video In channel. You should see the DVD screen saver on the TV (if no Disc is in the Player).
2 Press OPEN/CLOSE on the front of the DVD Player to open the disc tray.
Load your Disc in the tray, with the label facing up. If the Disc (DVD) is
3 Press OPEN/CLOSE again to close the tray.
4 Playback may start automatically. If not:
•If you are playing a DVD, a Disc menu may appear. If the Title or Chapter selections are numbered, press a Number button to select an item. Or, press 9 8 ; : to select an item, then press OK.
Playback will begin. Or, follow the
•If you are playing an Audio CD, press PLAY : to start playback.
•If you are playing a Video CD that has Playback Control, press the
DISC MENU button to access the menu or index of the Video CD. Press the Previous 4, Next ¢, 9, 8, ;, :, or Number but- tons to select an item, then press OK. Follow the instructions pro- vided by the Video CD. Not all Video CDs have Playback Control. See the Disc case or menus for details.
5 To stop playback at any time, press STOP C.
If you press STOP C only once, playback will resume at the same point if you press PLAY : later to restart playback. This is known as the Resume feature.
If you press STOP C more than once to stop playback, play will start at the beginning of the Disc again if you press PLAY : later to restart playback.
1
5
4
4
Helpful Hints
•If the Disc is locked by Parental Controls, you must enter your password or unlock the Disc. Details are on pages
•DVDs have a region code. Your Player will not play Discs that have a region code different from the region code of your Player. The Player’s region code is 1 (one). Details are on page 7.
•Opening the disc tray or turning off the DVD Player’s power may cancel the Resume feature.
