VIDEO IN
1 Connect the yellow VIDEO (VIDEO OUT) jack of the DVD Player to the corresponding VIDEO IN jack on your TV. Use the supplied video cable.
2 Connect the supplied audio cable to the red and white AUDIO OUT (left and right) jacks on the DVD Player and to the left/right AUDIO IN jacks on the TV. Match the cable colors to the jack colors.
3 Plug the power cords of the DVD Player and the TV into an active power outlet. Press the POWER ON/OFF button on the front of the DVD Player to turn on the DVD Player.
4 Turn on the TV power. Set the TV to the correct Video In channel. See your TV owner’s manual for details. Or, change chan- nels at the TV until you see the DVD screen saver on the TV.
LEFT AUDIO IN
1
RIGHT AUDIO IN
10 Hookups (cont’d)
Connecting to a TV Only
TV has a yellow CVBS Video In jack
2 | Back of TV |
| (example only) |
3
Helpful Hints
• On the TV, the Video In jack is usually yellow and might be labeled video, CVBS, composite, or baseband.
• If your TV has a single Audio In jack instead of separate left/right Audio In jacks, you will need a different audio cable. You need a “splitter” audio cable to go from the left/right AUDIO OUT jacks of the DVD Player to the single Audio In jack on your TV. See your electronics retailer for details.