32

Videotape Recording

Read and follow the steps below to record a television program
onto a videotape. Before you begin,make sure the DVD/VCR is in
VCR mode. Press VCR so the green VCR light appears on the
front of the DVD/VCR.
1Turn on the TV and set it to channel 3 or 4 or the
Video In channel. If you connected the DVD/VCR to the
TV using the supplied audio and video cables, select your
TV’s Video In channel. Details are on page 11.
If you connected the DVD/VCR to the TV using the sup-
plied RF coaxial cable, choose channel 3 (or 4) at the TV.
Details are on pages 8-10.
2Insert a tape with its record tab intact into the cas-
sette compartment of the DVD/VCR.If tape playback
begins, press STOP C.
3Press SPEED until the desired tape speed (SP or
SLP) appears briefly on the screen. Details about tape
speed are on page 76.
4Press SKIP3/CHoor SKIP / CHpor the
Number buttons to select the TV channel to
record.
5Press RECORD Ito start recording.The red
RECORD light will appear on the front of the DVD/VCR.
6To pause the recording,press PAUSE konce. The
red RECORD light will flash. To r esume recording,
press RECORD Ior press PAUSE kagain. The red
RECORD light will come on again.
7To stop recording,press STOP C.

Recording Prevention

Video Cassettes have record tabs to ensure that recordings are
not accidentally erased.
1To prevent recording,break off the tab with a
screwdriver.
2To allow recording,cover the hole with clear tape.
• Other recording options are on
pages 33-39.
• The VCR will record in a preset vol-
ume.
• Pause will switch to Stop after five
minutes to protect the VCR and
the tape from damage.When a
recording is paused, review the
pause time remaining with the
■
marks on the screen. Each
■
mark equals one minute remain-
ing. During the last minute of
paused recording, the
■
mark will
flash.
• If any menu is on the TV screen,
the RECORD
I
button on the
remote does not function. Press
CLEAR/RESET to remove the
menu.Then, press RECORD
I
.Or,
use the RECORD
I
button on the
front of the DVD/VCR.
Helpful Hints
1Turn on the TV.
2Insert a tape in the
DVD/VCR.
Remove the
tab to prevent
recording.
Cover the
hole to allow
recording.
STANDBY-ON
PLAY
VCR/TV
VCRDVD
OK
MENU MENU
SYSTEM
RETURN TITLE
A-B
CLEAR/RESET SLOW
SUBTITLE ZOOM
ANGLE
REPEAT REPEAT
AUDIO
SEARCH MODE
DISPLAY
SKIP / CH
DISC/VCR
PAUSESTOP
VCR Plus+ RECORDTIMER SET
SPEED
1 2 3
7
6
5
4
890
+10
45-6
3
76
4
H9421CD/DVD750(EN).pgs1-51.QX3 03.4.11 11:29 AM Page 32